Jan 22 18:41:00 mtu8-10383 backend: Initiating messenger Jan 22 18:41:00 mtu8-10383 backend: `` ` ````` ```` `````` ```` `````` ```````` ```````` ````` ````````` ``````` ````````````````` ``````````` `````` ```````` ````````` ```` ```` ```` ``````` `` ```````` ``` ``` `````` ``````` ```````````` ``` ``` `` ``````````` `````` ``````` ```` ```` ``````````````` ````` ```````````` ````` ```````` ````` ```````````` ``````````````` ```````` ```````````` ``````````````` ```` ````````` ````````` ```````````` `````````````` ```````` `````` `````````` ```````````` ````` ````````` `` `````````` ```````````` ````````````` ````` ```` ``````````` ````````` ````` `````` `````` ``````````` ```` `` ``````` ``````` `````````` ``` ````` ``````` ``````````` ``````` `````` `` ``````````` ``````` ``````` `````````` `` ``````````` `````````` `````````` ````````` ```````` ``` ` P H O E N I X G E O P H Y S I C S 2 0 1 3 v1.54.2 10383 Jan 22 18:41:01 mtu8-10383 backend: Panel Map loaded, discovery mode: 1 Jan 22 18:41:01 mtu8-10383 backend: Timing Module Hardware: BTM01-I Jan 22 18:41:01 mtu8-10383 backend: Timing Module Firmware: 0001002FX Jan 22 18:41:01 mtu8-10383 mqtt: No control config in config.json, disabling net control Jan 22 18:41:02 mtu8-10383 backend: Timing Module CPLD: 2912 Jan 22 18:41:02 mtu8-10383 backend: Timing Module Serial: 031F77 Jan 22 18:41:03 mtu8-10383 backend: {2}<3> CLEARED: Missing timing module Jan 22 18:41:03 mtu8-10383 backend: Mapped device @ [2-2.2], enum <14>, to channel index <3> Jan 22 18:41:03 mtu8-10383 backend: {1}<3> CLEARED: Missing channels Jan 22 18:41:03 mtu8-10383 backend: Mapped device @ [2-2.4], enum <15>, to channel index <4> Jan 22 18:41:03 mtu8-10383 backend: Mapped device @ [2-2.6.2], enum <16>, to channel index <0> Jan 22 18:41:03 mtu8-10383 backend: Mapped device @ [2-2.6.4], enum <17>, to channel index <1> Jan 22 18:41:03 mtu8-10383 backend: Mapped device @ [2-2.6.5], enum <18>, to channel index <2> Jan 22 18:41:03 mtu8-10383 backend: {5}<3> CLEARED: Hardware not initialized yet Jan 22 18:41:03 mtu8-10383 backend: Mapped channel DATA @ enum <18>, to channel index <2> Jan 22 18:41:03 mtu8-10383 backend: Mapped channel DATA @ enum <17>, to channel index <1> Jan 22 18:41:03 mtu8-10383 backend: Mapped channel DATA @ enum <16>, to channel index <0> Jan 22 18:41:03 mtu8-10383 backend: Mapped channel DATA @ enum <15>, to channel index <4> Jan 22 18:41:03 mtu8-10383 backend: Mapped channel DATA @ enum <14>, to channel index <3> Jan 22 18:41:03 mtu8-10383 backend: Discovered Timing module at 13 Jan 22 18:41:03 mtu8-10383 backend: Discovered Channel module at 14 Jan 22 18:41:03 mtu8-10383 backend: Discovered Channel module at 15 Jan 22 18:41:03 mtu8-10383 backend: Discovered Channel module at 16 Jan 22 18:41:03 mtu8-10383 backend: Discovered Channel module at 17 Jan 22 18:41:03 mtu8-10383 backend: Discovered Channel module at 18 Jan 22 18:41:03 mtu8-10383 backend: Discovered motherboard at 19 Jan 22 18:41:03 mtu8-10383 backend: Backplane Hardware: BMB01-G Jan 22 18:41:03 mtu8-10383 backend: Backplane Firmware: 00010036X Jan 22 18:41:03 mtu8-10383 backend: Backplane Serial: 031D53 Jan 22 18:41:03 mtu8-10383 backend: Timing Module Hardware: BTM01-I Jan 22 18:41:03 mtu8-10383 backend: Backplane Bootloader version: 00000015 Jan 22 18:41:04 mtu8-10383 backend: {37}<0> SD card ready Jan 22 18:41:04 mtu8-10383 backend: Configuration loaded with 0 scheduled tasks Jan 22 18:41:04 mtu8-10383 backend: Ch H2 [0]: Setting config for sensor type: MTC-150 Jan 22 18:41:04 mtu8-10383 backend: Ch0: Setting dac: 8000 Jan 22 18:41:04 mtu8-10383 backend: Channel Module #0 Serial #: 031EC1 Jan 22 18:41:04 mtu8-10383 backend: Channel Module #0 Firmware: 0001001FX Jan 22 18:41:04 mtu8-10383 backend: Chanel Module #0 Hardware: BCM01-K Jan 22 18:41:04 mtu8-10383 backend: Sensor @ channel #0 switched to BMT mode Jan 22 18:41:04 mtu8-10383 backend: Ch0: Setting dac: 8000 Jan 22 18:41:04 mtu8-10383 backend: Channel Module #1 Serial #: 031EC3 Jan 22 18:41:04 mtu8-10383 backend: Channel Module #1 Firmware: 0001001FX Jan 22 18:41:04 mtu8-10383 backend: Chanel Module #1 Hardware: BCM01-K Jan 22 18:41:04 mtu8-10383 backend: Ch1: Setting dac: 8000 Jan 22 18:41:05 mtu8-10383 backend: Ch H1 [2]: Setting config for sensor type: MTC-150 Jan 22 18:41:05 mtu8-10383 backend: Ch2: Setting dac: 8000 Jan 22 18:41:05 mtu8-10383 backend: Channel Module #2 Serial #: 031EC4 Jan 22 18:41:05 mtu8-10383 backend: Channel Module #2 Firmware: 0001001FX Jan 22 18:41:05 mtu8-10383 backend: Chanel Module #2 Hardware: BCM01-K Jan 22 18:41:05 mtu8-10383 backend: Sensor @ channel #2 switched to BMT mode Jan 22 18:41:05 mtu8-10383 backend: Ch2: Setting dac: 8000 Jan 22 18:41:05 mtu8-10383 backend: Channel Module Sensor Message (Ch2):SMS I 17 00 MTC150 - SE57076A Jan 22 18:41:05 mtu8-10383 backend: Channel Module Sensor Message (Ch2):SMS F 03 00 B Jan 22 18:41:05 mtu8-10383 backend: Channel Module #3 Serial #: 031ED8 Jan 22 18:41:05 mtu8-10383 backend: Channel Module #3 Firmware: 0001001FX Jan 22 18:41:05 mtu8-10383 backend: Chanel Module #3 Hardware: BCM01-K Jan 22 18:41:05 mtu8-10383 backend: Ch H3 [3]: Setting config for sensor type: MTC-150 Jan 22 18:41:05 mtu8-10383 backend: Ch3: Setting dac: 8000 Jan 22 18:41:05 mtu8-10383 backend: Sensor @ channel #3 switched to BMT mode Jan 22 18:41:05 mtu8-10383 backend: Ch3: Setting dac: 8000 Jan 22 18:41:05 mtu8-10383 backend: Channel Module Sensor Message (Ch3):SMS I 17 00 MTC150 - SE57190A Jan 22 18:41:05 mtu8-10383 backend: Channel Module Sensor Message (Ch3):SMS F 03 00 B Jan 22 18:41:05 mtu8-10383 backend: Channel Module #4 Serial #: 031EA0 Jan 22 18:41:05 mtu8-10383 backend: Channel Module #4 Firmware: 0001001FX Jan 22 18:41:05 mtu8-10383 backend: Ch4: Setting dac: 8000 Jan 22 18:41:05 mtu8-10383 backend: 5 channel modules initialized from configuration file Jan 22 18:41:05 mtu8-10383 backend: Initializing screen Jan 22 18:41:05 mtu8-10383 backend: Socket: Listening on port 61206 Jan 22 18:41:05 mtu8-10383 backend: {"name":"genome", "backend_version":"v1.54.2", "receiver_model":"RMT03-G", "receiver_commercial_name":"MTU-5C", "backplane_hw_ver":"BMB01-G ", "backplane_fw_ver":"00010036X", "backplane_boot_ver":"00000015", "timingmodule_hw_ver":"BTM01-I ", "timingmodule_fw_ver":"0001002FX", "timingmodule_cpld":"2912", "chans_hw_ver":["BCM01-K ","BCM01-K ","BCM01-K ","BCM01-K ",""], "chan_ser_num" : ["031EC1","031EC3","031EC4","031ED8","031EA0"], "chan_fw_ver" : ["0001001FX","0001001FX","0001001FX","0001001FX","0001001FX"]} Jan 22 18:41:05 mtu8-10383 backend: Chanel Module #4 Hardware: BCM01-K Jan 22 18:42:40 mtu8-10383 backend: {18}<0> Time synchronized and enough satellites present Jan 22 18:42:40 mtu8-10383 backend: Timing Module Ready for ACQ (37 B 31) Jan 22 18:44:28 mtu8-10383 backend: Ch0: Setting dac: 8000 Jan 22 18:44:28 mtu8-10383 backend: Ch1: Setting dac: 8000 Jan 22 18:44:28 mtu8-10383 backend: Ch2: Setting dac: 8000 Jan 22 18:44:28 mtu8-10383 backend: Ch3: Setting dac: 8000 Jan 22 18:44:28 mtu8-10383 backend: Ch4: Setting dac: 8000 Jan 22 18:44:28 mtu8-10383 backend: {72}<0> Compensating DC levels Jan 22 18:44:28 mtu8-10383 backend: Ch H2 [0]: Setting config for sensor type: MTC-150 Jan 22 18:44:28 mtu8-10383 backend: Ch0: Setting dac: 8000 Jan 22 18:44:28 mtu8-10383 backend: Sensor @ channel #0 switched to BMT mode Jan 22 18:44:28 mtu8-10383 backend: Channel Module Sensor Message (Ch0):SMS I 17 00 MTC150 - SE57188A Jan 22 18:44:28 mtu8-10383 backend: Channel Module Sensor Message (Ch0):SMS F 03 00 B Jan 22 18:44:28 mtu8-10383 backend: Ch H1 [2]: Setting config for sensor type: MTC-150 Jan 22 18:44:28 mtu8-10383 backend: Ch2: Setting dac: 8000 Jan 22 18:44:28 mtu8-10383 backend: Sensor @ channel #2 switched to BMT mode Jan 22 18:44:28 mtu8-10383 backend: Ch H3 [3]: Setting config for sensor type: MTC-150 Jan 22 18:44:28 mtu8-10383 backend: Ch3: Setting dac: 8000 Jan 22 18:44:28 mtu8-10383 backend: Channel Module Sensor Message (Ch2):SMS I 17 00 MTC150 - SE57076A Jan 22 18:44:28 mtu8-10383 backend: Channel Module Sensor Message (Ch2):SMS F 03 00 B Jan 22 18:44:28 mtu8-10383 backend: Sensor @ channel #3 switched to BMT mode Jan 22 18:44:28 mtu8-10383 backend: Ch0: Starting AUTODC ACQ Jan 22 18:44:28 mtu8-10383 backend: >> Connected to channel module 0 (H2) Jan 22 18:44:28 mtu8-10383 backend: Channel Module Sensor Message (Ch3):SMS I 17 00 MTC150 - SE57190A Jan 22 18:44:28 mtu8-10383 backend: Channel Module Sensor Message (Ch3):SMS F 03 00 B Jan 22 18:44:28 mtu8-10383 backend: Ch1: Starting AUTODC ACQ Jan 22 18:44:28 mtu8-10383 backend: >> Connected to channel module 1 (E1) Jan 22 18:44:28 mtu8-10383 backend: Ch2: Starting AUTODC ACQ Jan 22 18:44:28 mtu8-10383 backend: >> Connected to channel module 2 (H1) Jan 22 18:44:29 mtu8-10383 backend: Ch3: Starting AUTODC ACQ Jan 22 18:44:29 mtu8-10383 backend: >> Connected to channel module 3 (H3) Jan 22 18:44:29 mtu8-10383 backend: Ch4: Starting AUTODC ACQ Jan 22 18:44:29 mtu8-10383 backend: >> Connected to channel module 4 (E2) Jan 22 18:44:39 mtu8-10383 backend: --> Ch2 AvgTotal is -111125 @ gain=4.000000 Jan 22 18:44:39 mtu8-10383 backend: --> Ch2 needs a DAC of: 32659 [7F93] Jan 22 18:44:39 mtu8-10383 backend: --> Ch1 AvgTotal is -131338 @ gain=1.000000 Jan 22 18:44:39 mtu8-10383 backend: --> Ch1 needs a DAC of: 32255 [7DFF] Jan 22 18:44:39 mtu8-10383 backend: --> Ch0 AvgTotal is 93545 @ gain=4.000000 Jan 22 18:44:39 mtu8-10383 backend: --> Ch0 needs a DAC of: 32859 [805B] Jan 22 18:44:39 mtu8-10383 backend: --> Ch4 AvgTotal is -10970 @ gain=1.000000 Jan 22 18:44:39 mtu8-10383 backend: --> Ch4 needs a DAC of: 32725 [7FD5] Jan 22 18:44:39 mtu8-10383 backend: --> Ch3 AvgTotal is -362774 @ gain=4.000000 Jan 22 18:44:39 mtu8-10383 backend: --> Ch3 needs a DAC of: 32414 [7E9E] Jan 22 18:44:41 mtu8-10383 backend: -- Disconnected from channel module 0 (H2) Jan 22 18:44:41 mtu8-10383 backend: -- Disconnected from channel module 1 (E1) Jan 22 18:44:41 mtu8-10383 backend: -- Disconnected from channel module 2 (H1) Jan 22 18:44:41 mtu8-10383 backend: -- Disconnected from channel module 3 (H3) Jan 22 18:44:41 mtu8-10383 backend: -- Disconnected from channel module 4 (E2) Jan 22 18:44:42 mtu8-10383 backend: Ch0: Setting dac: 8000 Jan 22 18:44:42 mtu8-10383 backend: Ch1: Setting dac: 8000 Jan 22 18:44:42 mtu8-10383 backend: Ch2: Setting dac: 8000 Jan 22 18:44:42 mtu8-10383 backend: Ch3: Setting dac: 8000 Jan 22 18:44:43 mtu8-10383 backend: Ch4: Setting dac: 8000 Jan 22 18:44:43 mtu8-10383 backend: {75}<0> Detecting magnetic sensors Jan 22 18:44:43 mtu8-10383 backend: Ch0: Setting dac: 8000 Jan 22 18:44:43 mtu8-10383 backend: Ch2: Setting dac: 8000 Jan 22 18:44:43 mtu8-10383 backend: Ch3: Setting dac: 8000 Jan 22 18:44:43 mtu8-10383 backend: Ch0: Starting MAG_DETECT ACQ Jan 22 18:44:43 mtu8-10383 backend: >> Connected to channel module 0 (H2) Jan 22 18:44:43 mtu8-10383 backend: Ch2: Starting MAG_DETECT ACQ Jan 22 18:44:43 mtu8-10383 backend: >> Connected to channel module 2 (H1) Jan 22 18:44:43 mtu8-10383 backend: Ch3: Starting MAG_DETECT ACQ Jan 22 18:44:43 mtu8-10383 backend: >> Connected to channel module 3 (H3) Jan 22 18:45:02 mtu8-10383 backend: -- Disconnected from channel module 0 (H2) Jan 22 18:45:02 mtu8-10383 backend: -- Disconnected from channel module 2 (H1) Jan 22 18:45:02 mtu8-10383 backend: -- Disconnected from channel module 3 (H3) Jan 22 18:45:03 mtu8-10383 backend: H2 2Hz 0.007300 5Hz 0.007312 10Hz 0.007307 20Hz 0.007311 MTC-150 Jan 22 18:45:05 mtu8-10383 backend: H1 2Hz 0.007327 5Hz 0.007320 10Hz 0.007329 20Hz 0.007333 MTC-150 Jan 22 18:45:06 mtu8-10383 backend: H3 2Hz 0.007334 5Hz 0.007312 10Hz 0.007335 20Hz 0.007330 MTC-150 Jan 22 18:45:06 mtu8-10383 backend: Ch0: Setting dac: 8000 Jan 22 18:45:06 mtu8-10383 backend: Ch1: Setting dac: 8000 Jan 22 18:45:06 mtu8-10383 backend: Ch2: Setting dac: 8000 Jan 22 18:45:07 mtu8-10383 backend: Ch3: Setting dac: 8000 Jan 22 18:45:07 mtu8-10383 backend: Ch4: Setting dac: 8000 Jan 22 18:45:07 mtu8-10383 backend: {71}<0> Measuring pot resistance Jan 22 18:45:07 mtu8-10383 backend: Ch1: Setting dac: 8000 Jan 22 18:45:07 mtu8-10383 backend: Ch4: Setting dac: 8000 Jan 22 18:45:07 mtu8-10383 backend: Ch1: Starting POTRES ACQ Jan 22 18:45:07 mtu8-10383 backend: >> Connected to channel module 1 (E1) Jan 22 18:45:07 mtu8-10383 backend: Ch4: Starting POTRES ACQ Jan 22 18:45:07 mtu8-10383 backend: >> Connected to channel module 4 (E2) Jan 22 18:45:42 mtu8-10383 backend: -- Disconnected from channel module 1 (E1) Jan 22 18:45:42 mtu8-10383 backend: -- Disconnected from channel module 4 (E2) Jan 22 18:45:44 mtu8-10383 backend: Pot Res E1[-] @ 2 Hz Off 804.618144 On 508.902912 Jan 22 18:45:44 mtu8-10383 backend: Pot Res E1[-] @ 5 Hz Off 803.949880 On 492.401281 Jan 22 18:45:44 mtu8-10383 backend: Pot Res E1[-] @ 10 Hz Off 803.706489 On 480.379232 Jan 22 18:45:45 mtu8-10383 backend: Pot Res E1[+] @ 2 Hz Off 504.273619 On 1583.033872 Jan 22 18:45:45 mtu8-10383 backend: Pot Res E1[+] @ 5 Hz Off 506.697057 On 1520.579726 Jan 22 18:45:45 mtu8-10383 backend: Pot Res E1[+] @ 10 Hz Off 507.513915 On 1471.059730 Jan 22 18:45:46 mtu8-10383 backend: Pot Res E2[-] @ 2 Hz Off 63.742126 On 472.650954 Jan 22 18:45:46 mtu8-10383 backend: Pot Res E2[-] @ 5 Hz Off 63.240081 On 456.842187 Jan 22 18:45:46 mtu8-10383 backend: Pot Res E2[-] @ 10 Hz Off 63.062491 On 443.006595 Jan 22 18:45:48 mtu8-10383 backend: Pot Res E2[+] @ 2 Hz Off -265.224799 On 321.105668 Jan 22 18:45:48 mtu8-10383 backend: Pot Res E2[+] @ 5 Hz Off -266.010896 On 313.875708 Jan 22 18:45:48 mtu8-10383 backend: Pot Res E2[+] @ 10 Hz Off -266.273963 On 309.542356 Jan 22 18:45:48 mtu8-10383 backend: {64}<0> Instrument idle Jan 22 18:45:49 mtu8-10383 backend: Ch0: Setting dac: 805B Jan 22 18:45:49 mtu8-10383 backend: Ch1: Setting dac: 7DFF Jan 22 18:45:49 mtu8-10383 backend: Ch2: Setting dac: 7F93 Jan 22 18:45:49 mtu8-10383 backend: Ch3: Setting dac: 7E9E Jan 22 18:45:49 mtu8-10383 backend: Ch4: Setting dac: 7FD5 Jan 22 18:45:49 mtu8-10383 backend: {65}<0> Acquiring Data Jan 22 18:45:49 mtu8-10383 backend: Ch0: Starting ACQ Jan 22 18:45:49 mtu8-10383 backend: >> Connected to channel module 0 (H2) Jan 22 18:45:49 mtu8-10383 backend: Ch1: Starting ACQ Jan 22 18:45:49 mtu8-10383 backend: >> Connected to channel module 1 (E1) Jan 22 18:45:49 mtu8-10383 backend: Ch2: Starting ACQ Jan 22 18:45:49 mtu8-10383 backend: >> Connected to channel module 2 (H1) Jan 22 18:45:49 mtu8-10383 backend: Ch3: Starting ACQ Jan 22 18:45:49 mtu8-10383 backend: >> Connected to channel module 3 (H3) Jan 22 18:45:49 mtu8-10383 backend: Ch4: Starting ACQ Jan 22 18:45:49 mtu8-10383 backend: >> Connected to channel module 4 (E2) Jan 22 18:46:33 mtu8-10383 backend: Stop button pressed. Stop acquisition... Jan 22 18:46:33 mtu8-10383 backend: {36}<0> Transferring files to SD card Jan 22 18:46:34 mtu8-10383 backend: -- Disconnected from channel module 0 (H2) Jan 22 18:46:34 mtu8-10383 backend: -- Disconnected from channel module 1 (E1) Jan 22 18:46:34 mtu8-10383 backend: -- Disconnected from channel module 2 (H1) Jan 22 18:46:34 mtu8-10383 backend: -- Disconnected from channel module 3 (H3) Jan 22 18:46:34 mtu8-10383 backend: -- Disconnected from channel module 4 (E2) Jan 22 18:46:40 mtu8-10383 backend: {36}<0> CLEARED: Transferring files to SD card Jan 22 18:46:40 mtu8-10383 backend: {64}<0> Instrument idle Jan 22 18:49:05 mtu8-10383 backend: Ch0: Setting dac: 8000 Jan 22 18:49:05 mtu8-10383 backend: Ch1: Setting dac: 8000 Jan 22 18:49:05 mtu8-10383 backend: Ch2: Setting dac: 8000 Jan 22 18:49:05 mtu8-10383 backend: Ch3: Setting dac: 8000 Jan 22 18:49:05 mtu8-10383 backend: Ch4: Setting dac: 8000 Jan 22 18:49:05 mtu8-10383 backend: {72}<0> Compensating DC levels Jan 22 18:49:06 mtu8-10383 backend: Ch H2 [0]: Setting config for sensor type: MTC-150 Jan 22 18:49:06 mtu8-10383 backend: Ch0: Setting dac: 8000 Jan 22 18:49:06 mtu8-10383 backend: Channel Module Sensor Message (Ch0):SMS I 17 00 MTC150 - SE57188A Jan 22 18:49:06 mtu8-10383 backend: Sensor @ channel #0 switched to BMT mode Jan 22 18:49:06 mtu8-10383 backend: Ch H1 [2]: Setting config for sensor type: MTC-150 Jan 22 18:49:06 mtu8-10383 backend: Ch2: Setting dac: 8000 Jan 22 18:49:06 mtu8-10383 backend: Channel Module Sensor Message (Ch2):SMS I 17 00 MTC150 - SE57076A Jan 22 18:49:06 mtu8-10383 backend: Channel Module Sensor Message (Ch0):SMS F 03 00 B Jan 22 18:49:06 mtu8-10383 backend: Sensor @ channel #2 switched to BMT mode Jan 22 18:49:06 mtu8-10383 backend: Ch H3 [3]: Setting config for sensor type: MTC-150 Jan 22 18:49:06 mtu8-10383 backend: Ch3: Setting dac: 8000 Jan 22 18:49:06 mtu8-10383 backend: Channel Module Sensor Message (Ch2):SMS F 03 00 B Jan 22 18:49:06 mtu8-10383 backend: Sensor @ channel #3 switched to BMT mode Jan 22 18:49:06 mtu8-10383 backend: Channel Module Sensor Message (Ch3):SMS I 17 00 MTC150 - SE57190A Jan 22 18:49:06 mtu8-10383 backend: Channel Module Sensor Message (Ch3):SMS F 03 00 B Jan 22 18:49:06 mtu8-10383 backend: Ch0: Starting AUTODC ACQ Jan 22 18:49:06 mtu8-10383 backend: >> Connected to channel module 0 (H2) Jan 22 18:49:06 mtu8-10383 backend: Ch1: Starting AUTODC ACQ Jan 22 18:49:06 mtu8-10383 backend: >> Connected to channel module 1 (E1) Jan 22 18:49:06 mtu8-10383 backend: Ch2: Starting AUTODC ACQ Jan 22 18:49:06 mtu8-10383 backend: >> Connected to channel module 2 (H1) Jan 22 18:49:06 mtu8-10383 backend: Ch3: Starting AUTODC ACQ Jan 22 18:49:06 mtu8-10383 backend: >> Connected to channel module 3 (H3) Jan 22 18:49:06 mtu8-10383 backend: Ch4: Starting AUTODC ACQ Jan 22 18:49:06 mtu8-10383 backend: >> Connected to channel module 4 (E2) Jan 22 18:49:17 mtu8-10383 backend: --> Ch2 AvgTotal is -139907 @ gain=4.000000 Jan 22 18:49:17 mtu8-10383 backend: --> Ch2 needs a DAC of: 32631 [7F77] Jan 22 18:49:17 mtu8-10383 backend: --> Ch1 AvgTotal is -6021 @ gain=1.000000 Jan 22 18:49:17 mtu8-10383 backend: --> Ch1 needs a DAC of: 32744 [7FE8] Jan 22 18:49:17 mtu8-10383 backend: --> Ch0 AvgTotal is 90782 @ gain=4.000000 Jan 22 18:49:17 mtu8-10383 backend: --> Ch0 needs a DAC of: 32857 [8059] Jan 22 18:49:17 mtu8-10383 backend: --> Ch4 AvgTotal is -9015 @ gain=1.000000 Jan 22 18:49:17 mtu8-10383 backend: --> Ch4 needs a DAC of: 32733 [7FDD] Jan 22 18:49:17 mtu8-10383 backend: --> Ch3 AvgTotal is -364457 @ gain=4.000000 Jan 22 18:49:17 mtu8-10383 backend: --> Ch3 needs a DAC of: 32412 [7E9C] Jan 22 18:49:19 mtu8-10383 backend: -- Disconnected from channel module 0 (H2) Jan 22 18:49:19 mtu8-10383 backend: -- Disconnected from channel module 1 (E1) Jan 22 18:49:19 mtu8-10383 backend: -- Disconnected from channel module 2 (H1) Jan 22 18:49:19 mtu8-10383 backend: -- Disconnected from channel module 3 (H3) Jan 22 18:49:19 mtu8-10383 backend: -- Disconnected from channel module 4 (E2) Jan 22 18:49:20 mtu8-10383 backend: Ch0: Setting dac: 8000 Jan 22 18:49:20 mtu8-10383 backend: Ch1: Setting dac: 8000 Jan 22 18:49:20 mtu8-10383 backend: Ch2: Setting dac: 8000 Jan 22 18:49:20 mtu8-10383 backend: Ch3: Setting dac: 8000 Jan 22 18:49:20 mtu8-10383 backend: Ch4: Setting dac: 8000 Jan 22 18:49:20 mtu8-10383 backend: {75}<0> Detecting magnetic sensors Jan 22 18:49:20 mtu8-10383 backend: Ch0: Setting dac: 8000 Jan 22 18:49:20 mtu8-10383 backend: Ch2: Setting dac: 8000 Jan 22 18:49:20 mtu8-10383 backend: Ch3: Setting dac: 8000 Jan 22 18:49:20 mtu8-10383 backend: Ch0: Starting MAG_DETECT ACQ Jan 22 18:49:20 mtu8-10383 backend: >> Connected to channel module 0 (H2) Jan 22 18:49:20 mtu8-10383 backend: Ch2: Starting MAG_DETECT ACQ Jan 22 18:49:20 mtu8-10383 backend: >> Connected to channel module 2 (H1) Jan 22 18:49:20 mtu8-10383 backend: Ch3: Starting MAG_DETECT ACQ Jan 22 18:49:20 mtu8-10383 backend: >> Connected to channel module 3 (H3) Jan 22 18:49:40 mtu8-10383 backend: -- Disconnected from channel module 0 (H2) Jan 22 18:49:40 mtu8-10383 backend: -- Disconnected from channel module 2 (H1) Jan 22 18:49:40 mtu8-10383 backend: -- Disconnected from channel module 3 (H3) Jan 22 18:49:41 mtu8-10383 backend: H2 2Hz 0.007313 5Hz 0.007306 10Hz 0.007311 20Hz 0.007309 MTC-150 Jan 22 18:49:42 mtu8-10383 backend: H1 2Hz 0.007322 5Hz 0.007319 10Hz 0.007326 20Hz 0.007328 MTC-150 Jan 22 18:49:44 mtu8-10383 backend: H3 2Hz 0.007433 5Hz 0.007898 10Hz 0.007430 20Hz 0.007331 MTC-150 Jan 22 18:49:44 mtu8-10383 backend: Ch0: Setting dac: 8000 Jan 22 18:49:44 mtu8-10383 backend: Ch1: Setting dac: 8000 Jan 22 18:49:44 mtu8-10383 backend: Ch2: Setting dac: 8000 Jan 22 18:49:44 mtu8-10383 backend: Ch3: Setting dac: 8000 Jan 22 18:49:44 mtu8-10383 backend: Ch4: Setting dac: 8000 Jan 22 18:49:44 mtu8-10383 backend: {71}<0> Measuring pot resistance Jan 22 18:49:44 mtu8-10383 backend: Ch1: Setting dac: 8000 Jan 22 18:49:44 mtu8-10383 backend: Ch4: Setting dac: 8000 Jan 22 18:49:45 mtu8-10383 backend: Ch1: Starting POTRES ACQ Jan 22 18:49:45 mtu8-10383 backend: >> Connected to channel module 1 (E1) Jan 22 18:49:45 mtu8-10383 backend: Ch4: Starting POTRES ACQ Jan 22 18:49:45 mtu8-10383 backend: >> Connected to channel module 4 (E2) Jan 22 18:50:19 mtu8-10383 backend: -- Disconnected from channel module 1 (E1) Jan 22 18:50:19 mtu8-10383 backend: -- Disconnected from channel module 4 (E2) Jan 22 18:50:20 mtu8-10383 backend: Pot Res E1[-] @ 2 Hz Off 632.565017 On 500.325530 Jan 22 18:50:20 mtu8-10383 backend: Pot Res E1[-] @ 5 Hz Off 631.699367 On 483.757115 Jan 22 18:50:20 mtu8-10383 backend: Pot Res E1[-] @ 10 Hz Off 631.379078 On 471.619259 Jan 22 18:50:21 mtu8-10383 backend: Pot Res E1[+] @ 2 Hz Off 299.597007 On 620.073879 Jan 22 18:50:21 mtu8-10383 backend: Pot Res E1[+] @ 5 Hz Off 299.473049 On 612.815938 Jan 22 18:50:21 mtu8-10383 backend: Pot Res E1[+] @ 10 Hz Off 299.437583 On 605.384192 Jan 22 18:50:23 mtu8-10383 backend: Pot Res E2[-] @ 2 Hz Off -137.122936 On 467.172182 Jan 22 18:50:23 mtu8-10383 backend: Pot Res E2[-] @ 5 Hz Off -137.891205 On 452.024194 Jan 22 18:50:23 mtu8-10383 backend: Pot Res E2[-] @ 10 Hz Off -138.180083 On 439.013288 Jan 22 18:50:24 mtu8-10383 backend: Pot Res E2[+] @ 2 Hz Off -262.635765 On 317.553238 Jan 22 18:50:24 mtu8-10383 backend: Pot Res E2[+] @ 5 Hz Off -263.566954 On 310.141650 Jan 22 18:50:24 mtu8-10383 backend: Pot Res E2[+] @ 10 Hz Off -263.888095 On 304.838433 Jan 22 18:50:24 mtu8-10383 backend: {64}<0> Instrument idle Jan 22 18:50:25 mtu8-10383 backend: Ch0: Setting dac: 8059 Jan 22 18:50:25 mtu8-10383 backend: Ch1: Setting dac: 7FE8 Jan 22 18:50:25 mtu8-10383 backend: Ch2: Setting dac: 7F77 Jan 22 18:50:26 mtu8-10383 backend: Ch3: Setting dac: 7E9C Jan 22 18:50:26 mtu8-10383 backend: Ch4: Setting dac: 7FDD Jan 22 18:50:26 mtu8-10383 backend: {65}<0> Acquiring Data Jan 22 18:50:26 mtu8-10383 backend: Ch0: Starting ACQ Jan 22 18:50:26 mtu8-10383 backend: >> Connected to channel module 0 (H2) Jan 22 18:50:26 mtu8-10383 backend: Ch1: Starting ACQ Jan 22 18:50:26 mtu8-10383 backend: >> Connected to channel module 1 (E1) Jan 22 18:50:26 mtu8-10383 backend: Ch2: Starting ACQ Jan 22 18:50:26 mtu8-10383 backend: >> Connected to channel module 2 (H1) Jan 22 18:50:26 mtu8-10383 backend: Ch3: Starting ACQ Jan 22 18:50:26 mtu8-10383 backend: >> Connected to channel module 3 (H3) Jan 22 18:50:26 mtu8-10383 backend: Ch4: Starting ACQ Jan 22 18:50:26 mtu8-10383 backend: >> Connected to channel module 4 (E2) Jan 22 21:52:17 mtu8-10383 backend: Stop button pressed. Stop acquisition... Jan 22 21:52:17 mtu8-10383 backend: {36}<0> Transferring files to SD card Jan 22 21:52:18 mtu8-10383 backend: -- Disconnected from channel module 0 (H2) Jan 22 21:52:18 mtu8-10383 backend: -- Disconnected from channel module 1 (E1) Jan 22 21:52:18 mtu8-10383 backend: -- Disconnected from channel module 2 (H1) Jan 22 21:52:18 mtu8-10383 backend: -- Disconnected from channel module 3 (H3) Jan 22 21:52:18 mtu8-10383 backend: -- Disconnected from channel module 4 (E2)