Dec 20 13:45:18 mtu8-10383 backend: Initiating messenger Dec 20 13:45:19 mtu8-10383 backend: `` ` ````` ```` `````` ```` `````` ```````` ```````` ````` ````````` ``````` ````````````````` ``````````` `````` ```````` ````````` ```` ```` ```` ``````` `` ```````` ``` ``` `````` ``````` ```````````` ``` ``` `` ``````````` `````` ``````` ```` ```` ``````````````` ````` ```````````` ````` ```````` ````` ```````````` ``````````````` ```````` ```````````` ``````````````` ```` ````````` ````````` ```````````` `````````````` ```````` `````` `````````` ```````````` ````` ````````` `` `````````` ```````````` ````````````` ````` ```` ``````````` ````````` ````` `````` `````` ``````````` ```` `` ``````` ``````` `````````` ``` ````` ``````` ``````````` ``````` `````` `` ``````````` ``````` ``````` `````````` `` ``````````` `````````` `````````` ````````` ```````` ``` ` P H O E N I X G E O P H Y S I C S 2 0 1 3 v1.54.2 10383 Dec 20 13:45:19 mtu8-10383 backend: Panel Map loaded, discovery mode: 1 Dec 20 13:45:19 mtu8-10383 backend: Timing Module Hardware: BTM01-I Dec 20 13:45:19 mtu8-10383 backend: Timing Module Firmware: 0001002FX Dec 20 13:45:19 mtu8-10383 mqtt: No control config in config.json, disabling net control Dec 20 13:45:20 mtu8-10383 backend: Timing Module CPLD: 2912 Dec 20 13:45:20 mtu8-10383 backend: Timing Module Serial: 031F77 Dec 20 13:45:21 mtu8-10383 backend: {2}<3> CLEARED: Missing timing module Dec 20 13:45:21 mtu8-10383 backend: Mapped device @ [2-2.2], enum <14>, to channel index <3> Dec 20 13:45:21 mtu8-10383 backend: {1}<3> CLEARED: Missing channels Dec 20 13:45:21 mtu8-10383 backend: Mapped device @ [2-2.4], enum <15>, to channel index <4> Dec 20 13:45:21 mtu8-10383 backend: Mapped device @ [2-2.6.2], enum <16>, to channel index <0> Dec 20 13:45:21 mtu8-10383 backend: Mapped device @ [2-2.6.4], enum <17>, to channel index <1> Dec 20 13:45:21 mtu8-10383 backend: Mapped device @ [2-2.6.5], enum <18>, to channel index <2> Dec 20 13:45:21 mtu8-10383 backend: {5}<3> CLEARED: Hardware not initialized yet Dec 20 13:45:21 mtu8-10383 backend: Mapped channel DATA @ enum <18>, to channel index <2> Dec 20 13:45:21 mtu8-10383 backend: Mapped channel DATA @ enum <17>, to channel index <1> Dec 20 13:45:21 mtu8-10383 backend: Mapped channel DATA @ enum <16>, to channel index <0> Dec 20 13:45:21 mtu8-10383 backend: Mapped channel DATA @ enum <15>, to channel index <4> Dec 20 13:45:21 mtu8-10383 backend: Mapped channel DATA @ enum <14>, to channel index <3> Dec 20 13:45:21 mtu8-10383 backend: Discovered Timing module at 13 Dec 20 13:45:21 mtu8-10383 backend: Discovered Channel module at 14 Dec 20 13:45:21 mtu8-10383 backend: Discovered Channel module at 15 Dec 20 13:45:21 mtu8-10383 backend: Discovered Channel module at 16 Dec 20 13:45:21 mtu8-10383 backend: Discovered Channel module at 17 Dec 20 13:45:21 mtu8-10383 backend: Discovered Channel module at 18 Dec 20 13:45:21 mtu8-10383 backend: Discovered motherboard at 19 Dec 20 13:45:21 mtu8-10383 backend: Backplane Hardware: BMB01-G Dec 20 13:45:21 mtu8-10383 backend: Backplane Firmware: 00010036X Dec 20 13:45:21 mtu8-10383 backend: Backplane Serial: 031D53 Dec 20 13:45:21 mtu8-10383 backend: Timing Module Hardware: BTM01-I Dec 20 13:45:21 mtu8-10383 backend: Backplane Bootloader version: 00000015 Dec 20 13:45:22 mtu8-10383 backend: {37}<0> SD card ready Dec 20 13:45:22 mtu8-10383 backend: Configuration loaded with 0 scheduled tasks Dec 20 13:45:22 mtu8-10383 backend: Ch H2 [0]: Setting config for sensor type: MTC-150 Dec 20 13:45:22 mtu8-10383 backend: Ch0: Setting dac: 8000 Dec 20 13:45:22 mtu8-10383 backend: Channel Module #0 Serial #: 031EC1 Dec 20 13:45:22 mtu8-10383 backend: Channel Module #0 Firmware: 0001001FX Dec 20 13:45:22 mtu8-10383 backend: Chanel Module #0 Hardware: BCM01-K Dec 20 13:45:22 mtu8-10383 backend: Sensor @ channel #0 switched to BMT mode Dec 20 13:45:22 mtu8-10383 backend: Ch0: Setting dac: 8000 Dec 20 13:45:22 mtu8-10383 backend: Channel Module Sensor Message (Ch0):SMS I 17 00 MTC150 - SE57188A Dec 20 13:45:22 mtu8-10383 backend: Channel Module Sensor Message (Ch0):SMS F 03 00 B Dec 20 13:45:22 mtu8-10383 backend: Channel Module #1 Serial #: 031EC3 Dec 20 13:45:22 mtu8-10383 backend: Channel Module #1 Firmware: 0001001FX Dec 20 13:45:22 mtu8-10383 backend: Chanel Module #1 Hardware: BCM01-K Dec 20 13:45:22 mtu8-10383 backend: Ch1: Setting dac: 8000 Dec 20 13:45:23 mtu8-10383 backend: Ch H1 [2]: Setting config for sensor type: MTC-150 Dec 20 13:45:23 mtu8-10383 backend: Ch2: Setting dac: 8000 Dec 20 13:45:23 mtu8-10383 backend: Channel Module #2 Serial #: 031EC4 Dec 20 13:45:23 mtu8-10383 backend: Channel Module #2 Firmware: 0001001FX Dec 20 13:45:23 mtu8-10383 backend: Chanel Module #2 Hardware: BCM01-K Dec 20 13:45:23 mtu8-10383 backend: Sensor @ channel #2 switched to BMT mode Dec 20 13:45:23 mtu8-10383 backend: Ch2: Setting dac: 8000 Dec 20 13:45:23 mtu8-10383 backend: Channel Module Sensor Message (Ch2):SMS I 17 00 MTC150 - SE57076A Dec 20 13:45:23 mtu8-10383 backend: Channel Module Sensor Message (Ch2):SMS F 03 00 B Dec 20 13:45:23 mtu8-10383 backend: Channel Module #3 Serial #: 031ED8 Dec 20 13:45:23 mtu8-10383 backend: Channel Module #3 Firmware: 0001001FX Dec 20 13:45:23 mtu8-10383 backend: Chanel Module #3 Hardware: BCM01-K Dec 20 13:45:23 mtu8-10383 backend: Ch H3 [3]: Setting config for sensor type: MTC-150 Dec 20 13:45:23 mtu8-10383 backend: Ch3: Setting dac: 8000 Dec 20 13:45:23 mtu8-10383 backend: Sensor @ channel #3 switched to BMT mode Dec 20 13:45:23 mtu8-10383 backend: Ch3: Setting dac: 8000 Dec 20 13:45:23 mtu8-10383 backend: Channel Module Sensor Message (Ch3):SMS I 17 00 MTC150 - SE57190A Dec 20 13:45:23 mtu8-10383 backend: Channel Module Sensor Message (Ch3):SMS F 03 00 B Dec 20 13:45:23 mtu8-10383 backend: Channel Module #4 Serial #: 031EA0 Dec 20 13:45:23 mtu8-10383 backend: Channel Module #4 Firmware: 0001001FX Dec 20 13:45:23 mtu8-10383 backend: Ch4: Setting dac: 8000 Dec 20 13:45:23 mtu8-10383 backend: 5 channel modules initialized from configuration file Dec 20 13:45:23 mtu8-10383 backend: Initializing screen Dec 20 13:45:23 mtu8-10383 backend: Socket: Listening on port 61206 Dec 20 13:45:23 mtu8-10383 backend: {"name":"genome", "backend_version":"v1.54.2", "receiver_model":"RMT03-G", "receiver_commercial_name":"MTU-5C", "backplane_hw_ver":"BMB01-G ", "backplane_fw_ver":"00010036X", "backplane_boot_ver":"00000015", "timingmodule_hw_ver":"BTM01-I ", "timingmodule_fw_ver":"0001002FX", "timingmodule_cpld":"2912", "chans_hw_ver":["BCM01-K ","BCM01-K ","BCM01-K ","BCM01-K ",""], "chan_ser_num" : ["031EC1","031EC3","031EC4","031ED8","031EA0"], "chan_fw_ver" : ["0001001FX","0001001FX","0001001FX","0001001FX","0001001FX"]} Dec 20 13:45:23 mtu8-10383 backend: Chanel Module #4 Hardware: BCM01-K Dec 20 13:46:58 mtu8-10383 backend: {18}<0> Time synchronized and enough satellites present Dec 20 13:46:58 mtu8-10383 backend: Timing Module Ready for ACQ (37 9 31) Dec 20 13:59:48 mtu8-10383 backend: Ch0: Setting dac: 8000 Dec 20 13:59:48 mtu8-10383 backend: Ch1: Setting dac: 8000 Dec 20 13:59:49 mtu8-10383 backend: Ch2: Setting dac: 8000 Dec 20 13:59:49 mtu8-10383 backend: Ch3: Setting dac: 8000 Dec 20 13:59:49 mtu8-10383 backend: Ch4: Setting dac: 8000 Dec 20 13:59:49 mtu8-10383 backend: {72}<0> Compensating DC levels Dec 20 13:59:49 mtu8-10383 backend: Ch H2 [0]: Setting config for sensor type: MTC-150 Dec 20 13:59:49 mtu8-10383 backend: Ch0: Setting dac: 8000 Dec 20 13:59:49 mtu8-10383 backend: Sensor @ channel #0 switched to BMT mode Dec 20 13:59:49 mtu8-10383 backend: Ch H1 [2]: Setting config for sensor type: MTC-150 Dec 20 13:59:49 mtu8-10383 backend: Ch2: Setting dac: 8000 Dec 20 13:59:49 mtu8-10383 backend: Channel Module Sensor Message (Ch0):SMS I 17 00 MTC150 - SE57188A Dec 20 13:59:49 mtu8-10383 backend: Channel Module Sensor Message (Ch0):SMS F 03 00 B Dec 20 13:59:49 mtu8-10383 backend: Sensor @ channel #2 switched to BMT mode Dec 20 13:59:49 mtu8-10383 backend: Ch H3 [3]: Setting config for sensor type: MTC-150 Dec 20 13:59:49 mtu8-10383 backend: Ch3: Setting dac: 8000 Dec 20 13:59:49 mtu8-10383 backend: Channel Module Sensor Message (Ch3):SMS I 17 00 MTC150 - SE57190A Dec 20 13:59:49 mtu8-10383 backend: Channel Module Sensor Message (Ch2):SMS I 17 00 MTC150 - SE57076A Dec 20 13:59:49 mtu8-10383 backend: Channel Module Sensor Message (Ch2):SMS F 03 00 B Dec 20 13:59:49 mtu8-10383 backend: Sensor @ channel #3 switched to BMT mode Dec 20 13:59:49 mtu8-10383 backend: Ch0: Starting AUTODC ACQ Dec 20 13:59:49 mtu8-10383 backend: >> Connected to channel module 0 (H2) Dec 20 13:59:49 mtu8-10383 backend: Ch1: Starting AUTODC ACQ Dec 20 13:59:49 mtu8-10383 backend: >> Connected to channel module 1 (E1) Dec 20 13:59:49 mtu8-10383 backend: Channel Module Sensor Message (Ch3):SMS F 03 00 B Dec 20 13:59:49 mtu8-10383 backend: Ch2: Starting AUTODC ACQ Dec 20 13:59:49 mtu8-10383 backend: >> Connected to channel module 2 (H1) Dec 20 13:59:49 mtu8-10383 backend: Ch3: Starting AUTODC ACQ Dec 20 13:59:49 mtu8-10383 backend: >> Connected to channel module 3 (H3) Dec 20 13:59:49 mtu8-10383 backend: Ch4: Starting AUTODC ACQ Dec 20 13:59:49 mtu8-10383 backend: >> Connected to channel module 4 (E2) Dec 20 14:00:01 mtu8-10383 backend: --> Ch2 AvgTotal is -156674 @ gain=4.000000 Dec 20 14:00:01 mtu8-10383 backend: --> Ch2 needs a DAC of: 32615 [7F67] Dec 20 14:00:01 mtu8-10383 backend: --> Ch1 AvgTotal is 107815 @ gain=1.000000 Dec 20 14:00:01 mtu8-10383 backend: --> Ch1 needs a DAC of: 33189 [81A5] Dec 20 14:00:01 mtu8-10383 backend: --> Ch0 AvgTotal is 51046 @ gain=4.000000 Dec 20 14:00:01 mtu8-10383 backend: --> Ch0 needs a DAC of: 32818 [8032] Dec 20 14:00:01 mtu8-10383 backend: --> Ch4 AvgTotal is 77030 @ gain=1.000000 Dec 20 14:00:01 mtu8-10383 backend: --> Ch4 needs a DAC of: 33069 [812D] Dec 20 14:00:01 mtu8-10383 backend: --> Ch3 AvgTotal is -54852 @ gain=4.000000 Dec 20 14:00:01 mtu8-10383 backend: --> Ch3 needs a DAC of: 32714 [7FCA] Dec 20 14:00:02 mtu8-10383 backend: -- Disconnected from channel module 0 (H2) Dec 20 14:00:02 mtu8-10383 backend: -- Disconnected from channel module 1 (E1) Dec 20 14:00:02 mtu8-10383 backend: -- Disconnected from channel module 2 (H1) Dec 20 14:00:02 mtu8-10383 backend: -- Disconnected from channel module 3 (H3) Dec 20 14:00:02 mtu8-10383 backend: -- Disconnected from channel module 4 (E2) Dec 20 14:00:03 mtu8-10383 backend: Ch0: Setting dac: 8000 Dec 20 14:00:04 mtu8-10383 backend: Ch1: Setting dac: 8000 Dec 20 14:00:04 mtu8-10383 backend: Ch2: Setting dac: 8000 Dec 20 14:00:04 mtu8-10383 backend: Ch3: Setting dac: 8000 Dec 20 14:00:04 mtu8-10383 backend: Ch4: Setting dac: 8000 Dec 20 14:00:04 mtu8-10383 backend: {75}<0> Detecting magnetic sensors Dec 20 14:00:04 mtu8-10383 backend: Ch0: Setting dac: 8000 Dec 20 14:00:04 mtu8-10383 backend: Ch2: Setting dac: 8000 Dec 20 14:00:04 mtu8-10383 backend: Ch3: Setting dac: 8000 Dec 20 14:00:04 mtu8-10383 backend: Ch0: Starting MAG_DETECT ACQ Dec 20 14:00:04 mtu8-10383 backend: >> Connected to channel module 0 (H2) Dec 20 14:00:04 mtu8-10383 backend: Ch2: Starting MAG_DETECT ACQ Dec 20 14:00:04 mtu8-10383 backend: >> Connected to channel module 2 (H1) Dec 20 14:00:04 mtu8-10383 backend: Ch3: Starting MAG_DETECT ACQ Dec 20 14:00:04 mtu8-10383 backend: >> Connected to channel module 3 (H3) Dec 20 14:00:23 mtu8-10383 backend: -- Disconnected from channel module 0 (H2) Dec 20 14:00:23 mtu8-10383 backend: -- Disconnected from channel module 2 (H1) Dec 20 14:00:23 mtu8-10383 backend: -- Disconnected from channel module 3 (H3) Dec 20 14:00:25 mtu8-10383 backend: H2 2Hz 0.007306 5Hz 0.007313 10Hz 0.007315 20Hz 0.007307 MTC-150 Dec 20 14:00:26 mtu8-10383 backend: H1 2Hz 0.007313 5Hz 0.007318 10Hz 0.007319 20Hz 0.007318 MTC-150 Dec 20 14:00:27 mtu8-10383 backend: H3 2Hz 0.007314 5Hz 0.007314 10Hz 0.007312 20Hz 0.007316 MTC-150 Dec 20 14:00:27 mtu8-10383 backend: Ch0: Setting dac: 8000 Dec 20 14:00:28 mtu8-10383 backend: Ch1: Setting dac: 8000 Dec 20 14:00:28 mtu8-10383 backend: Ch2: Setting dac: 8000 Dec 20 14:00:28 mtu8-10383 backend: Ch3: Setting dac: 8000 Dec 20 14:00:28 mtu8-10383 backend: Ch4: Setting dac: 8000 Dec 20 14:00:28 mtu8-10383 backend: {71}<0> Measuring pot resistance Dec 20 14:00:28 mtu8-10383 backend: Ch1: Setting dac: 8000 Dec 20 14:00:28 mtu8-10383 backend: Ch4: Setting dac: 8000 Dec 20 14:00:28 mtu8-10383 backend: Ch1: Starting POTRES ACQ Dec 20 14:00:28 mtu8-10383 backend: >> Connected to channel module 1 (E1) Dec 20 14:00:28 mtu8-10383 backend: Ch4: Starting POTRES ACQ Dec 20 14:00:28 mtu8-10383 backend: >> Connected to channel module 4 (E2) Dec 20 14:01:03 mtu8-10383 backend: -- Disconnected from channel module 1 (E1) Dec 20 14:01:03 mtu8-10383 backend: -- Disconnected from channel module 4 (E2) Dec 20 14:01:05 mtu8-10383 backend: Pot Res E1[-] @ 2 Hz Off 35.047443 On 1194.436849 Dec 20 14:01:05 mtu8-10383 backend: Pot Res E1[-] @ 5 Hz Off 36.197107 On 1176.672237 Dec 20 14:01:05 mtu8-10383 backend: Pot Res E1[-] @ 10 Hz Off 36.576293 On 1162.288463 Dec 20 14:01:06 mtu8-10383 backend: Pot Res E1[+] @ 2 Hz Off 1612.779346 On 815.087692 Dec 20 14:01:06 mtu8-10383 backend: Pot Res E1[+] @ 5 Hz Off 1610.316705 On 767.027924 Dec 20 14:01:06 mtu8-10383 backend: Pot Res E1[+] @ 10 Hz Off 1609.510850 On 739.178208 Dec 20 14:01:08 mtu8-10383 backend: Pot Res E2[-] @ 2 Hz Off -65.910217 On 1050.835509 Dec 20 14:01:08 mtu8-10383 backend: Pot Res E2[-] @ 5 Hz Off -67.716561 On 1031.316666 Dec 20 14:01:08 mtu8-10383 backend: Pot Res E2[-] @ 10 Hz Off -68.621656 On 1016.448793 Dec 20 14:01:09 mtu8-10383 backend: Pot Res E2[+] @ 2 Hz Off 2473.602872 On 1101.183240 Dec 20 14:01:09 mtu8-10383 backend: Pot Res E2[+] @ 5 Hz Off 2471.238243 On 1087.972574 Dec 20 14:01:09 mtu8-10383 backend: Pot Res E2[+] @ 10 Hz Off 2470.737299 On 1082.982796 Dec 20 14:01:09 mtu8-10383 backend: {64}<0> Instrument idle Dec 20 14:01:10 mtu8-10383 backend: Ch0: Setting dac: 8032 Dec 20 14:01:10 mtu8-10383 backend: Ch1: Setting dac: 81A5 Dec 20 14:01:10 mtu8-10383 backend: Ch2: Setting dac: 7F67 Dec 20 14:01:10 mtu8-10383 backend: Ch3: Setting dac: 7FCA Dec 20 14:01:10 mtu8-10383 backend: Ch4: Setting dac: 812D Dec 20 14:01:10 mtu8-10383 backend: {65}<0> Acquiring Data Dec 20 14:01:11 mtu8-10383 backend: Ch0: Starting ACQ Dec 20 14:01:11 mtu8-10383 backend: >> Connected to channel module 0 (H2) Dec 20 14:01:11 mtu8-10383 backend: Ch1: Starting ACQ Dec 20 14:01:11 mtu8-10383 backend: >> Connected to channel module 1 (E1) Dec 20 14:01:11 mtu8-10383 backend: Ch2: Starting ACQ Dec 20 14:01:11 mtu8-10383 backend: >> Connected to channel module 2 (H1) Dec 20 14:01:11 mtu8-10383 backend: Ch3: Starting ACQ Dec 20 14:01:11 mtu8-10383 backend: >> Connected to channel module 3 (H3) Dec 20 14:01:11 mtu8-10383 backend: Ch4: Starting ACQ Dec 20 14:01:11 mtu8-10383 backend: >> Connected to channel module 4 (E2) Dec 20 14:01:54 mtu8-10383 backend: Stop button pressed. Stop acquisition... Dec 20 14:01:54 mtu8-10383 backend: {36}<0> Transferring files to SD card Dec 20 14:01:55 mtu8-10383 backend: -- Disconnected from channel module 0 (H2) Dec 20 14:01:55 mtu8-10383 backend: -- Disconnected from channel module 1 (E1) Dec 20 14:01:55 mtu8-10383 backend: -- Disconnected from channel module 2 (H1) Dec 20 14:01:55 mtu8-10383 backend: -- Disconnected from channel module 3 (H3) Dec 20 14:01:55 mtu8-10383 backend: -- Disconnected from channel module 4 (E2) Dec 20 14:02:01 mtu8-10383 backend: {36}<0> CLEARED: Transferring files to SD card Dec 20 14:02:01 mtu8-10383 backend: {64}<0> Instrument idle Dec 20 14:02:11 mtu8-10383 backend: Ch0: Setting dac: 8000 Dec 20 14:02:11 mtu8-10383 backend: Ch1: Setting dac: 8000 Dec 20 14:02:11 mtu8-10383 backend: Ch2: Setting dac: 8000 Dec 20 14:02:11 mtu8-10383 backend: Ch3: Setting dac: 8000 Dec 20 14:02:11 mtu8-10383 backend: Ch4: Setting dac: 8000 Dec 20 14:02:11 mtu8-10383 backend: {72}<0> Compensating DC levels Dec 20 14:02:11 mtu8-10383 backend: Ch H2 [0]: Setting config for sensor type: MTC-150 Dec 20 14:02:11 mtu8-10383 backend: Ch0: Setting dac: 8000 Dec 20 14:02:11 mtu8-10383 backend: Channel Module Sensor Message (Ch0):SMS I 17 00 MTC150 - SE57188A Dec 20 14:02:11 mtu8-10383 backend: Sensor @ channel #0 switched to BMT mode Dec 20 14:02:11 mtu8-10383 backend: Ch H1 [2]: Setting config for sensor type: MTC-150 Dec 20 14:02:11 mtu8-10383 backend: Ch2: Setting dac: 8000 Dec 20 14:02:11 mtu8-10383 backend: Sensor @ channel #2 switched to BMT mode Dec 20 14:02:11 mtu8-10383 backend: Channel Module Sensor Message (Ch0):SMS F 03 00 B Dec 20 14:02:11 mtu8-10383 backend: Channel Module Sensor Message (Ch2):SMS I 17 00 MTC150 - SE57076A Dec 20 14:02:11 mtu8-10383 backend: Channel Module Sensor Message (Ch2):SMS F 03 00 B Dec 20 14:02:11 mtu8-10383 backend: Ch H3 [3]: Setting config for sensor type: MTC-150 Dec 20 14:02:11 mtu8-10383 backend: Ch3: Setting dac: 8000 Dec 20 14:02:11 mtu8-10383 backend: Sensor @ channel #3 switched to BMT mode Dec 20 14:02:11 mtu8-10383 backend: Channel Module Sensor Message (Ch3):SMS I 17 00 MTC150 - SE57190A Dec 20 14:02:11 mtu8-10383 backend: Channel Module Sensor Message (Ch3):SMS F 03 00 B Dec 20 14:02:11 mtu8-10383 backend: Ch0: Starting AUTODC ACQ Dec 20 14:02:11 mtu8-10383 backend: >> Connected to channel module 0 (H2) Dec 20 14:02:11 mtu8-10383 backend: Ch1: Starting AUTODC ACQ Dec 20 14:02:11 mtu8-10383 backend: >> Connected to channel module 1 (E1) Dec 20 14:02:11 mtu8-10383 backend: Ch2: Starting AUTODC ACQ Dec 20 14:02:11 mtu8-10383 backend: >> Connected to channel module 2 (H1) Dec 20 14:02:11 mtu8-10383 backend: Ch3: Starting AUTODC ACQ Dec 20 14:02:11 mtu8-10383 backend: >> Connected to channel module 3 (H3) Dec 20 14:02:12 mtu8-10383 backend: Ch4: Starting AUTODC ACQ Dec 20 14:02:12 mtu8-10383 backend: >> Connected to channel module 4 (E2) Dec 20 14:02:23 mtu8-10383 backend: --> Ch2 AvgTotal is -143137 @ gain=4.000000 Dec 20 14:02:23 mtu8-10383 backend: --> Ch2 needs a DAC of: 32628 [7F74] Dec 20 14:02:23 mtu8-10383 backend: --> Ch1 AvgTotal is 102872 @ gain=1.000000 Dec 20 14:02:23 mtu8-10383 backend: --> Ch1 needs a DAC of: 33170 [8192] Dec 20 14:02:23 mtu8-10383 backend: --> Ch0 AvgTotal is 53081 @ gain=4.000000 Dec 20 14:02:23 mtu8-10383 backend: --> Ch0 needs a DAC of: 32820 [8034] Dec 20 14:02:23 mtu8-10383 backend: --> Ch4 AvgTotal is 76860 @ gain=1.000000 Dec 20 14:02:23 mtu8-10383 backend: --> Ch4 needs a DAC of: 33068 [812C] Dec 20 14:02:23 mtu8-10383 backend: --> Ch3 AvgTotal is -38827 @ gain=4.000000 Dec 20 14:02:23 mtu8-10383 backend: --> Ch3 needs a DAC of: 32730 [7FDA] Dec 20 14:02:24 mtu8-10383 backend: -- Disconnected from channel module 0 (H2) Dec 20 14:02:24 mtu8-10383 backend: -- Disconnected from channel module 1 (E1) Dec 20 14:02:24 mtu8-10383 backend: -- Disconnected from channel module 2 (H1) Dec 20 14:02:24 mtu8-10383 backend: -- Disconnected from channel module 3 (H3) Dec 20 14:02:24 mtu8-10383 backend: -- Disconnected from channel module 4 (E2) Dec 20 14:02:25 mtu8-10383 backend: Ch0: Setting dac: 8000 Dec 20 14:02:25 mtu8-10383 backend: Ch1: Setting dac: 8000 Dec 20 14:02:25 mtu8-10383 backend: Ch2: Setting dac: 8000 Dec 20 14:02:25 mtu8-10383 backend: Ch3: Setting dac: 8000 Dec 20 14:02:25 mtu8-10383 backend: Ch4: Setting dac: 8000 Dec 20 14:02:25 mtu8-10383 backend: {75}<0> Detecting magnetic sensors Dec 20 14:02:25 mtu8-10383 backend: Ch0: Setting dac: 8000 Dec 20 14:02:26 mtu8-10383 backend: Ch2: Setting dac: 8000 Dec 20 14:02:26 mtu8-10383 backend: Ch3: Setting dac: 8000 Dec 20 14:02:26 mtu8-10383 backend: Ch0: Starting MAG_DETECT ACQ Dec 20 14:02:26 mtu8-10383 backend: >> Connected to channel module 0 (H2) Dec 20 14:02:26 mtu8-10383 backend: Ch2: Starting MAG_DETECT ACQ Dec 20 14:02:26 mtu8-10383 backend: >> Connected to channel module 2 (H1) Dec 20 14:02:26 mtu8-10383 backend: Ch3: Starting MAG_DETECT ACQ Dec 20 14:02:26 mtu8-10383 backend: >> Connected to channel module 3 (H3) Dec 20 14:02:44 mtu8-10383 backend: -- Disconnected from channel module 0 (H2) Dec 20 14:02:44 mtu8-10383 backend: -- Disconnected from channel module 2 (H1) Dec 20 14:02:44 mtu8-10383 backend: -- Disconnected from channel module 3 (H3) Dec 20 14:02:45 mtu8-10383 backend: H2 2Hz 0.007309 5Hz 0.007319 10Hz 0.007300 20Hz 0.007314 MTC-150 Dec 20 14:02:47 mtu8-10383 backend: H1 2Hz 0.007316 5Hz 0.007306 10Hz 0.007344 20Hz 0.007325 MTC-150 Dec 20 14:02:48 mtu8-10383 backend: H3 2Hz 0.007312 5Hz 0.007306 10Hz 0.007339 20Hz 0.007295 MTC-150 Dec 20 14:02:48 mtu8-10383 backend: Ch0: Setting dac: 8000 Dec 20 14:02:48 mtu8-10383 backend: Ch1: Setting dac: 8000 Dec 20 14:02:48 mtu8-10383 backend: Ch2: Setting dac: 8000 Dec 20 14:02:48 mtu8-10383 backend: Ch3: Setting dac: 8000 Dec 20 14:02:48 mtu8-10383 backend: Ch4: Setting dac: 8000 Dec 20 14:02:48 mtu8-10383 backend: {71}<0> Measuring pot resistance Dec 20 14:02:48 mtu8-10383 backend: Ch1: Setting dac: 8000 Dec 20 14:02:49 mtu8-10383 backend: Ch4: Setting dac: 8000 Dec 20 14:02:49 mtu8-10383 backend: Ch1: Starting POTRES ACQ Dec 20 14:02:49 mtu8-10383 backend: >> Connected to channel module 1 (E1) Dec 20 14:02:49 mtu8-10383 backend: Ch4: Starting POTRES ACQ Dec 20 14:02:49 mtu8-10383 backend: >> Connected to channel module 4 (E2) Dec 20 14:03:23 mtu8-10383 backend: -- Disconnected from channel module 1 (E1) Dec 20 14:03:23 mtu8-10383 backend: -- Disconnected from channel module 4 (E2) Dec 20 14:03:24 mtu8-10383 backend: Pot Res E1[-] @ 2 Hz Off -44.745997 On 1142.289523 Dec 20 14:03:24 mtu8-10383 backend: Pot Res E1[-] @ 5 Hz Off -46.089570 On 1136.363633 Dec 20 14:03:24 mtu8-10383 backend: Pot Res E1[-] @ 10 Hz Off -46.570933 On 1128.647974 Dec 20 14:03:26 mtu8-10383 backend: Pot Res E1[+] @ 2 Hz Off 1448.175788 On 757.259005 Dec 20 14:03:26 mtu8-10383 backend: Pot Res E1[+] @ 5 Hz Off 1445.597576 On 721.689612 Dec 20 14:03:26 mtu8-10383 backend: Pot Res E1[+] @ 10 Hz Off 1444.712990 On 700.455594 Dec 20 14:03:27 mtu8-10383 backend: Pot Res E2[-] @ 2 Hz Off -53.666363 On 1025.425628 Dec 20 14:03:27 mtu8-10383 backend: Pot Res E2[-] @ 5 Hz Off -53.008989 On 1008.732998 Dec 20 14:03:27 mtu8-10383 backend: Pot Res E2[-] @ 10 Hz Off -52.831084 On 994.558591 Dec 20 14:03:28 mtu8-10383 backend: Pot Res E2[+] @ 2 Hz Off 2360.059781 On 1088.079051 Dec 20 14:03:28 mtu8-10383 backend: Pot Res E2[+] @ 5 Hz Off 2357.891435 On 1076.481442 Dec 20 14:03:28 mtu8-10383 backend: Pot Res E2[+] @ 10 Hz Off 2357.172240 On 1072.065504 Dec 20 14:03:28 mtu8-10383 backend: {64}<0> Instrument idle Dec 20 14:03:29 mtu8-10383 backend: Ch0: Setting dac: 8034 Dec 20 14:03:30 mtu8-10383 backend: Ch1: Setting dac: 8192 Dec 20 14:03:30 mtu8-10383 backend: Ch2: Setting dac: 7F74 Dec 20 14:03:30 mtu8-10383 backend: Ch3: Setting dac: 7FDA Dec 20 14:03:30 mtu8-10383 backend: Ch4: Setting dac: 812C Dec 20 14:03:30 mtu8-10383 backend: {65}<0> Acquiring Data Dec 20 14:03:30 mtu8-10383 backend: Ch0: Starting ACQ Dec 20 14:03:30 mtu8-10383 backend: >> Connected to channel module 0 (H2) Dec 20 14:03:30 mtu8-10383 backend: Ch1: Starting ACQ Dec 20 14:03:30 mtu8-10383 backend: >> Connected to channel module 1 (E1) Dec 20 14:03:30 mtu8-10383 backend: Ch2: Starting ACQ Dec 20 14:03:30 mtu8-10383 backend: >> Connected to channel module 2 (H1) Dec 20 14:03:30 mtu8-10383 backend: Ch3: Starting ACQ Dec 20 14:03:30 mtu8-10383 backend: >> Connected to channel module 3 (H3) Dec 20 14:03:30 mtu8-10383 backend: Ch4: Starting ACQ Dec 20 14:03:30 mtu8-10383 backend: >> Connected to channel module 4 (E2) Dec 20 17:04:44 mtu8-10383 backend: Stop button pressed. Stop acquisition... Dec 20 17:04:44 mtu8-10383 backend: {36}<0> Transferring files to SD card Dec 20 17:04:45 mtu8-10383 backend: -- Disconnected from channel module 0 (H2) Dec 20 17:04:45 mtu8-10383 backend: -- Disconnected from channel module 1 (E1) Dec 20 17:04:45 mtu8-10383 backend: -- Disconnected from channel module 2 (H1) Dec 20 17:04:45 mtu8-10383 backend: -- Disconnected from channel module 3 (H3) Dec 20 17:04:45 mtu8-10383 backend: -- Disconnected from channel module 4 (E2)